7
USER INSTRUCTIONS
5. CHANGING THE YEOMAN CL BATTERIES
5.1 The appliance batteries are located to the left hand side of
the touch pad. This is behind the lower panel, Diagram 6.
To remove the panel lift slightly and pull forward.
6
AR2698
Battery holder rests
under bracket
5.2 Slide the lid off the top of the battery holder and remove
the old batteries.
5.3 Correctly position the three new C Cell size batteries into
the battery holder as shown in Diagram 7.
7
AR1488a
Refit the lid of the battery box and replace into position.
PLEASE ENSURE NO WIRES ARE TRAPPED BEFORE
REPLACING THE LOWER PANEL. THE TOUCH PAD
LEAD IS EASILY DAMAGED
6. ARRANGEMENT OF FUEL BED
6.1 ADVICE ON HANDLING AND DISPOSAL OF FIRE
CERAMICS
The fuel effect of the log version of this appliance is made
from Refractory Ceramic Fibre (RCF), a material which is
commonly used for this application.
Protective clothing is not required when handling these
articles, but we recommend you follow normal hygiene
rules of not smoking, eating or drinking in the work area
and always wash your hands before eating or drinking.
To ensure that the release of RCF fibres are kept to a
minimum, during installation and servicing a HEPA filtered
vacuum is recommended to remove any dust accumulated
in and around the appliance before and after working on it.
When servicing the appliance it is recommended that the
replaced items are not broken up, but are sealed within
heavy duty polythene bags and labelled as RCF waste.
RCF waste is classed as stable, non-reactive hazardous waste
and may be disposed of at a licensed landfill site.
Excessive exposure to these materials may cause temporary
irritation to eyes, skin and respiratory tract; wash hands
thoroughly after handling the material.
7. LOG LAYOUT
LOGS MUST BE POSITIONED ACCORDING TO THE
FOLLOWING INSTRUCTIONS TO GIVE THE CORRECT
FLAME EFFECT
7A. CL3 LAYOUT
7a.1 Ensure the burner tray is clean and free from any debris,
Diagram 8.
8
AR2103
The three logs that make up the fuel bed are visually
distinct and fit into specific parts on the burner tray.
7a.2 Place the rear log into position as illustrated in Diagram 9.
Ensure that the left hand edge butts up against the raised
groove in the burner tray and the back panel- see Detail A.
9
AR2103
Log 1
Detail A
(48 páginas)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comentários a estes Manuais