Yeoman and servicing Manual do Utilizador descarregar pdf (Página 11)

User Instructions

6.5 Fit the plug supplied into the hole where the riddling

mechanism is normally located and secure with bolt and

clamp (also supplied), see Diagram 16.

Plug

Clamp

Bolt

6.6 Replace the log guard and ashpan.

7. Extended Burning

7.1 It is possible to get the appliance to burn for extended

periods of time. In order to do this:

—De-ashpriortonalrefuelling.

— Burn new fuel at a high temperature for a few minutes

before adjusting the Primary Air Control.

— Set air controls to low combustion settings.

This will gradually blacken the glass but it will clear when

operated at a high temperature for a short period.

8. Ash Removal

Do not allow ash to build up as it may cause damage

and adversely effect the performance of the appliance.

Warning: Ash can remain hot long after appliance has

been in use.

8.1 Burning Wood with a Woodburning tray

— Open Doors.

— Leave a layer of ash to start the new fire on. Wood burns

best on a bed of ash (approx. 25mm (1") deep).

— Remove excess ash from the Woodburning tray with a

small shovel and place into a Stovax Ash Caddy (Stovax

Part No. 4227) or other suitable container.

— Rake the remaining ash evenly over the firebed.

Warning: Ash can remain hot long after appliance has

been in use.

— Using gloves, carefully remove ashpan using tool

supplied, see Diagram 22. Ensure the tool is fully

engaged before operation. Practise this technique before

hand with a cold ashpan.

— Place the ash into a Stovax Ash Caddy (Stovax Part No.

4227) or other suitable container.

Do not place hot ash in any container made from plastic

or any other combustible material.

— De-ash at least once a week.

8.2 All fuels: (When fitted with a Multi-fuel grate)

Burning Solid Fuels:

— De-ash the appliance before filling with new fuel. Do not

allow ash to build up on the underside of the grate as

this can cause premature failure.

Burning Wood:

— Leave a layer of ash on top of the riddling bars to start

the new fire on. Wood burns best on a bed of ash

(approx. 25mm (1") deep).

All Fuels:

— Insert the Riddling Tool into the socket, see Diagram 17.

Rotate to

operate

— Rotate the Riddling Tool backward and forward 3 or 4 times

to remove the ash. Do not force the handle beyond its natural

stop point. The ash will fall into the ashpan.

8.3 Open the door.

Warning: Ash can remain hot long after appliance has

been in use.

Using gloves, carefully remove ashpan using tool supplied,

see Diagram 17. Ensure the tool is fully engaged before

operation. Practise this technique before hand with a cold

ashpan.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 43 44

Comentários a estes Manuais

Sem comentários

Yeoman and servicing Manual do Utilizador Página 11

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Yeoman and servicing